How to Maintain Automatic Pool Covers?

In this article, we will be sharing all the things every pool owners need to know to maintain your automatic pool cover. This way, it will be in tip-top shape and in functional condition all throughout the summer season. Check out the maintenance tips below including the daily, weekly, monthly, and yearly chores.

DAILY CHORES

Monitor the chemistry of your water

The fact that automatic pool cover usually holds in chemicals makes it an issue. If this occurs to your pool cover, the levels of chlorine can’t dissipate just how they typically would that can make your pool cover corroded. To help prevent this, check your chlorine levels regularly and make sure that they are at the bare minimum.

Guarantee that the cover will be closed all the time

This helps in heating your pool. Actually, you can increase its temperature by 10 to 15 degrees if you keep the pool cover closed. If your pool is already heated, the automatic pool cover will help to keep up the heat rather than allowing it to be evaporated into the air. In fact, the heavy vinyl works better compared to a solar cover.

WEEKLY CHORES

Keep it clean

Using a leaf blower to eliminate any debris or leaves is the simplest means of cleaning the top of an automatic pool cover. However, it’s particularly essential to get rid of rainwater to prevent additional stress on the cover itself. To do this, you can utilize a water hose to eliminate debris, then buy a pool cover pump or shop vac to suck up the water.

Maintain your water level

You will not need to worry about a lot of evaporation if you have an automatic pool cover. Because of that, you don’t have to ensure and recheck whether the water level is still consistent. When the water level plunges below the mid-skimmer point, it could place a lot of stress on the tracks, ropes, and webbings that can possibly cause the cover system to collapse. Because of that, it’s important to fix any pool leaks immediately.

MONTHLY & YEARLY CHORES

Lubing and tightening the pulleys and mechanisms

Clean out any rotating surfaces first with a hose nozzle. Then, guarantee to lube and tighten them so that they will keep on properly working for a longer time.

Clean the water’s housing drains

Sometimes, the box that composes the electrical mechanisms and components can see pooling water from the rain or the pool. It’s essential to guarantee that it will be kept dry since additional moisture could result in damage or corrosion over time.

Clean the cover tracks

It’s common for the tracks to get an accumulation of debris over time, however, failing to clean it frequently enough could possibly cause the system to prematurely fail. It’s essential to spray out the tracks using a high-powered hose a couple of times every year to keep things smoothly running.

If you’re still contemplating whether you need to install or repair your pool, hire the best salt water pool contractor Miami for further assessment, assistance, and information.